How to apply antifouling Gold Coast paint

If you own a boat in Gold Coast, it’s necessary to store and keep your boat away from hull free marine growth, especially when they are in seawater. When your boat is operating at its normal state, the fuel cost is significantly reduced. Therefore maintaining your boat when it’s in seawater is very important. As a good boat owner, it’s necessary to put in place preventive maintenance on your boat.

The bottom of your boat is very important as it’s crucial in manoeuvrability. When the bottom of your boat is affected by hull free marine growth, the boat uses a lot of fuel to maneuver in seawater. The speed will also be affected greatly. To maintain the speed and efficiency of the boat, you must make sure it’s hull clean. Hull growth in the bottom of the boat is caused by marine organisms such as slime, algae, weeds, barnacles and zebra mussels. All these organisms can be eliminated from your boat with the help of antifouling Gold Coast paint. Here is how to apply antifouling paint at the bottom of your boat:

Painting the aluminium hull or outdrive

Boats that are applied with cuprous oxide antifouling paint are prone to corrosion on their aluminium hulls or outdrives. The corrosion on the aluminium hulls causes a lot of damage to the bottom, thus reducing its speed. The best antifouling Gold Coast paint that you should use to prevent this corrosion on the aluminium hulls is using cuprous thiocyanate or non-metallic zinc compounds.

Using bright colours

Suppose you want a clean and hull free marine growth on the bottom of your boat, the best antifouling paint to use white copper paint. The white copper antifouling paint will give you the bright colours that you want for the bottom of your boat.

Hauling over the winter and relaunching without repainting

The perfect remedy for hauling during winter and relaunching period without necessarily painting is to use ablative copolymer antifouling paint on the bottom of your boat. The copolymer antifouling paint releases some biocides, which makes sure that they wash away all the marine organisms that form on the bottom of your boat. The antifouling paint applied on the bottom line will continuously work on the high growth areas even after the hauling season fades out. You also don’t need to repaint the paint because light scrubbing and sanding can reactivate the paint and prepare your boat for action. It’s also good to apply the paint as the first on its own, and on the second and the third paint coat you can also add anti-slime additives to the paint to clean the growths fully.

Boat use

For boats that are frequently used, it’s good to use an ablative antifouling paint. The paint gives the hull a smooth finish throughout the time it’s in seawater. If your boat is not used frequently, the best antifouling paint that you can use is the modified epoxy paint. This type of antifouling paint provides your boat with a lot of antifouling benefits even if it’s not in use. If the boat is kept in the seawater for a long period of time, you can use a high copper content type of antifouling paint so that it can protect the hull for a longer period due to the leaching biocide formulation.

Applying antifouling paints can be a very easy task that you can do on your own, or you can call a professional so that the best paint products can be used on your boat. Contact antifouling by www.proyacht.com.au.